Everything you need to know to harvest your own marijuana
Outdoor Cultivation
This property was reserved by


ultimatum666

on

December 12, 1999

,p>
,p>
Acquiring Good Quality seed strains are often difficult to obtain. This is especially true for people who hang in a predominantly straight crowd and know few people who partake in the fine erb. The rule of thumb is if the weed gets you pretty high then the seed is usually good to grow. Seeds coming from green bud are often better to grow because the strain is frequently acclimated to the growing season of northern latitudes. Jamaican and Colombian varieties can not be easily produced in northern latitudes because the strains produce bud too late in the season. The results of growing these varieties in most of the U.S. will be little or no bud growth before the first frost hits. Sativa strains usually grow taller than the indica or indica-sativa hybrids. This can be a major drawback especially in the fall when other plants are dying off and trees are losing leaves. Some growers have success crossing sativa varieties from southern climates with Indica, and creating an offspring that will bud more timely.
When at parties, concerts, or other social events, keep an eye out for people breaking up bud and discarding seeds. The best time to look for seeds is from October to January because this is when most of the locally grown outdoor erb hits the market. Acquiring and maintaining a quality seed stock is the most fundamental task of a successful grower.
Finding a Site Aside from acquiring good seed, picking a prime location to grow is probably the most important task a grower is faced with. One of the best locations is in areas of grasslands that have small trees and bushes interspersed. Often a farmers field that has been out of production for ten years is ideal. Flood plains along rivers and streams are another good location, but the risk of losing seeds in the Spring or the harvest in the Fall due to flooding should be considered. Growers have also been known to plant in buckets in more rocky or mountainous terrain. This enables them to grow in areas that receive good sunlight but have rocky, untillable soil. Digging a site in areas of dense but short plant growth, like sticker bushes, is another suitable spot. The sticker bushes grow high enough to prevent people from seeing through them and also serve as a direct deterrence from people and large animals wandering into the site.
A grower can often use animal and insect life to his advantage. Bees, tics, green flies and the like can discourage people from wandering through fields so areas having an abundant insect population are prime locations. The most important criteria for an excellent growing site are good soil, available water, sunlight, and suitable cover. Other factors are secondary.
Good soil is sometimes hard to find but without it you won't get much of a harvest. So, if you find a site that is perfect for all other factors but has poor soil , you may want to consider bringing soil to the site. Soil is often the richest in areas where grassland vegetation has existed for a series of years. Grasslands recycle nutrients in the soil and form a thick layer of organic matter. Grassland biospheres require very little preparation to start growing, while other soil conditions require more work. Sandy soils often need potting soil or top soil along with a small amount of lime to make them more fertile. Soils with high amounts of clay need material, like peat moss, added to break up the clay and make the soil more porous. I'm a naturalist and disagree with some erb growing professionals who believe that planting along road sides can be productive. The lead and other toxic chemicals found in some of these soils is enough to discourage many vegetable growers from producing consumable or smokable plant material. If you live in a city, and lack your own means of transportation then use roadsides as your last resort.
A close water source is also very important. A site close to the water table would be ideal since bringing water into the site can get tiresome an d also dangerous. It can get very tiresome if you have many sites or even a few big sites. If you choose a site much higher than the water table or grow in buckets, you will quickly find that the amount of water needed during a dry summer will be enormous and will give you great incentive to find a site closer to the water table. The dangers in having to bring water to the sites are numerous. The greatest of these would be the chance of someone spotting you, possibly a cop. The second greatest would be the destruction of the foliage you have to walk through to get from the water source to the site. If you have to make more than one trip you run a big risk that a trail will become noticeable. Finding a stable water source in the summer can be another obstacle since small streams often dry up at this time. How often you will need to water is determined by the weather and that could require you to make unexpected trips to the sites. Each trip puts you at risk. Your goal is to minimize these trips.
Sunlight is less important than the previous two components but is still essential. Plants should be in areas that receive at least five hours of direct sunlight per day. Morning sunlight is preferable since plants tend to respond better to it than to the afternoon sunlight. Growers who scout sites during the winter months must be able to visualize how the landscape will be shaded by trees, and the path the sun will take come Spring. Of course, the greater the amount of sunlight the better, but when choosing a site sunlight is just one of many factors that must be considered.
The last criteria has nothing to do with plant biology, but rather focuses on minimizing the threat of unwanted attention from people wandering by. The cover should be both tall enough to keep people from spotting it and thick enough to discourage them from wandering too close to it. The best foliage to accomplish this is a large patch of big sticker bushes. If that's not available, look for foliage that grows to a height of six to eight feet by the fall and is far enough away from where someone might stray.
The Ability to hide plants amongst the flora in fields is an art and skill improved upon through practice. One favorite technique is to hide plants on the south side of bushes so that passers by will have difficulty spotting the plant(s). Plants still get adequate light in spite of the appearance of being crowded by the larger bush. The best hiding spot for erb is where people have their view blocked from all sides and has the appearance of being impenetrable. In areas where the vegetation growth is less than three feet the erb may need to be trimmed back or tied to the ground in order to create smaller bushier plants. Fields with small vegetation growth may have poor soil or can be dry upland environments where the soil frequently becomes too dry so use caution. Making erb junior blend in with the other plants in the field will minimize risk. In order to grow plants efficiently, an outdoor grower must use the natural landscape to his or her advantage.
Making a Trail One of the ways to ensure success is by creating trails that are not visible to passers by. This is easier in some places than in others. Areas having dense undergrowth with lots of sunlight can be ideal because plant growth is so rapid it will erase any damage to the vegetation between trips during the Spring and Summer. If you are growing plants in areas easy to spot trails then make the path weave back and forth so it becomes difficult for people to see a trail. Making a hidden trail to the site(s) is important because it allows the grower to minimize getting ripped off or worse, caught. People wander through undeveloped areas and follow trails to nowhere all the time. Their access can be limited through thoughtful planning of pathways and proper care in using them. When you walk through your entrance, do everything possible not to damage any of the foliage, especially toward the late Summer and early Fall. At this time of the year, damaged foliage usually will not regrow and this is when the plants need as much cover as possible. There are two things to keep in mind when making a trail to your site(s): 1) Can you see the trail you just made, if not that's great, if so look for ways to cover areas that look like a trail; 2) The more difficult it is for you to get to the site, the less likely someone else will try.
The Mechanics of Growing Your cousin Louie and his friend Sam are in town from Oklahoma and they have smoked a lot of grass and grown some in their backyards. Sam has a good rap, and appears knowledgeable about fine erb. Taking these two gentlemen for a walk in the fields might appear to be a good idea. Shit, they could offer some insightful pointers. I must caution against these excursions. Even if these men are the erb experts they appear, taking a walk with them may not be in your best interest. They are unfamiliar with the area and may not know where to run if the need arises. Walking with more than two people through a field can attract attention (the greater the number of people, the greater chance of being seen). The more people walking on a trail the larger the trail becomes and thus the greater the chance your trail can be followed by others. Every time you visit the site(s) you are putting the harvest and for that matter yourself at risk. This may be a small or large risk depending on the particular place but remember that no place is 100% safe. Unless it is an emergency situation where the buggy fly has infested your crop, and you are bringing in a specialist to offer expert advice, the site(s) should not be visited by strangers. Having a growing partner is recommended regardless of his or her competence, and even then the site(s) should only be visited to accomplish specific tasks. Trips to the site should occur at the following times.
A. Preparing The Soil: (early March - Mid April depending on climate)
I suggest buying 40lb. bags of organic potting soil and mixing this in with the existing soil. This soil is not often found at your local all-purpose store so some searching may be required. Potting soil is richer soil than commercial top soil so it goes a little bit farther when mixed with the existing soil. Lime may be necessary in areas with acidic soil and peat moss is a good additive for soils with a clay type consistency. I avoid chemical fertilizers, not just because I believe that organic farming is the best way, but also because toxic waste is produced from the manufacture of fertilizers.
It's also a good idea to put up a two foot high fence at this time. This will keep small animals out and the use of dried blood and/or human hair will fend off deer. Purchase a wire fence with small gaps, 2 inches or less between the metal strands. Collect enough sticks in the area to provide stakes that will support the fence about every 2 feet. Outline the site with the sticks and tie the fence to the sticks with string or wire. Cut the fence endstrand and bend the strands that protrude from the top of the fence out and down the outside to discourage animals from trying to jump over it. Camouflage the fence and site with normal ground debris as necessary before leaving.
B. Planting: (early April - early May)
There are different ways to go about planting:
1) The seed intensive method:
This method should only be used if you have an abundance of seeds. The seed intensive method entails planting many seeds in a small area. Its strength is that it can limit risk. When you journey to your newly prepared site(s), the seeds and trowels are hidden in your pockets. Plant the seeds about one half inch deep, unless the soil contains high amounts of clay then only plant seeds one quarter inch in the soil. If you setup small sites 3ft x 3ft square, put in three rows with a seed every one and a half inches. If you work out the Math this is roughly 72 seeds per site. Unfortunately, many growers, especially beginners, do not posses this many good seeds. If a grower creates four sites with this many seeds he or she is almost guaranteed a harvest. Yes, there will be some crowding and this is one of the drawbacks of using many seeds in a small area. Also, figure around 50% of the plants are going to be male so you must return to the site to cut out the males toward the end of Summer. Once the males are removed from the site, the females get more light and aren't as crowded. The seed intensive strategy tends to produce smaller plants because of crowding, but at the same time it helps ensure a harvest every season. In the present day of infrared photography, I believe it is important to have small sites to avoid detection from the air. This of course means growers may have to create a series of small plots in order to garner a year's supply of erb. If you grow merely for hobby, sport, or experimental purposes, than one site may suit you fine.
2) Planting small seedlings:
The strongest argument for this method of planting is that you get the opportunity to select for planting the strongest of the seedlings you've started. The strongest argument against this method is the risk of transporting the seedlings to their intended site(s). Transporting them requires you to find a method of concealing them, usually a box. The problem that then arises is that the size box needed to transport many plants may make this method too risky or totally impractical. The other concern with this method is that there is also the risk of shocking the seedlings when you put them outside in the site where they will be exposed to the harsh Spring weather. Before planting seedlings or sexed females they should be put outside and closely monitored at least three days before planting to become acclimated to the wind and change in temperature.
This method works best when you can set up a small shelter near your sites that is enclosed but not insulated. This shelter can be as small as the site and 18 inches tall or big enough to walk in, providing you have a safe location for such a structure. Starting seeds in this shelter gives the benefit of acclimating seedlings to a temperature much closer to that which they will face when they are planted in the site and it will also protect them from any late Spring snows and/or frosts.
3) Planting sexed females:
The advantage of planting sexed females is obvious; every plant will produce buds. The sex of plants can be determined by growing them until they're four inches high, and then decreasing the amount of light they receive to eight hours. The males are then identified and removed in one to two weeks. This method requires being able to control the amount of light the plants receive each day, and also requires that plants be started indoors earlier than you would normally start (late February - early March). This method allows growers to spread their plants across a wide area in smaller sites and also to hide plants amongst small trees and shrubs. By spreading two dozen female plants throughout a ten acre area in individual sites, a harvest is almost guaranteed, providing that you remember where all the sites are. Growers are encouraged to create a map of their sites to insure against memory loss. Just remember to guard that map closely. Putting anything about your operations in writing puts you at risk.
C. Weeding:
Three weeks after the plants or seeds are in the ground return to remove weeds that are crowding out the kind erb. Three weeks after the first weeding a second weeding should take place. A third weeding is optional, by this time the plants should be large enough to compete with the weeds, however, if you are in a site that has strong weeds around it you may have to cut the weeds back at additional times throughout the year. Remember, weeding does not mean destroying all vegetation within three feet of a plant. Weeds can help hide your crop and protect your crop from hungry animals. Nearby vegetation can also help keep water in the soil from evaporating in the hot sun. So don't go overboard and be very careful, it's very easy to accidently injure small plants or their roots trying to get rid of weeds.
D. Removing Males:
(If you are growing sexed females these trips can be omitted) Male plants will begin to produce their flowers and pollen as early as mid July for varieties acclimated to this climate. Varieties from more southern climates, may not start until mid September. This difference depends on the budding cycle of your variety, some plants start to bud earlier than others, so the exact time to cut the males will vary with the strain. If you are using a variety of different seeds it may be necessary to visit once a week from July 21 through September 15. The timely identification of a male plant is crucial to the success of the harvest. If the weather is exceptional during the time a male starts producing its flowers and you missed seeing the first signs during your last visit, you could wind up with a lot of seeds and little of the fine erb. A female can either generate a large seedless bud, a large bud with a few seeds, or a large bud that is almost totally seeds. The first case is achieved by removing all the male plants before any of their flowers open. The second case occurs when a few male flowers have opened but you remove them before any more open. The third case occurs when you miss-time the flowering of the male. This can be devastating if you have big female plants because you could loose 90% of the smokable erb to seed production. This last scenario may not always be bad though. If you are short on seeds for the next growing season, it may be prudent to let one or two males stand and fertilize a portion of the females. Good seeds are hard to come by, so if you have a strain you like, make sure to plan ahead and have at least a few hundred seeds for the future. The spotting of males is one of the most difficult of things to explain to a person that's never grown since it really takes careful attention to how the tops of male plants look at this stage of development. Even experienced growers will be unsure at times and will have to wait till the next visit to be sure. When a male enters the stage of flower development, the tips of the branches where a bud would develop will start to grow what looks like a little bud but it will have no white hairs coming out of it.
E. The Fungus:
Along with cops, thieves, animals, and insects, "the fungus" is another obstacle in the path of a successful growing season. When the buds are roughly half developed they become susceptible to a fungus or bud rot. It appears that growing conditions for the fungus are best when temperatures are between 60 and 80 degrees and the humidity is high. The fungus is very destructive and spreads quickly. It is a spore type of fungus that travels to other buds via the wind so it is impossible to prevent or stop if weather conditions permit it to grow. If things should go badly and the fungus starts to attack your plants, you must remove it immediately or it will spread to other areas of the plant or plants. Some growers will remove just the section of the bud that is infected whereas other growers will remove the entire branch. Removal of the entire branch better insures that the fungus is totally removed, and also enables the grower to sample the crop a few weeks ahead of time. The main point in removing the fungus is to be very careful. Since it is a spore type of fungus, the accidental jerking of an infected bud will release some of the spores and they could fall onto a lower bud so by the next visit, you might have to pull that bud too. Also be careful in touching the fungus with your fingers because your fingers could pick up the spores and then when you touch the next bud, the spores could cling to it and start eating away at that bud.
F. Emergency Visits:
The Real Estate and Construction Industries have conspired to develop housing near your crop and their "progress" must be monitored. A hurricane or tropical storm with winds over 50 miles per hour has visited your area. A drought takes place. etc. One of the drawbacks of growing outdoors is that you can not control for interference by outside forces. Emergency visits may be necessary but don't go crazy every time there's a bad storm. These plants are strong and can take some punishment.
The Harvest
Performed at night if possible. A nighttime run will limit the chances of someone seeing you. Do the most risky parts, such as carrying freshly cut erb where you could easily be spotted by a passing car, when the police jurisdiction changes shift. This can help ensure that officials do not spot you, and if a nosey nearby resident or passerby calls the police, it may take time before a car is dispatched to investigate. If harvesting at night, use flashlights sparingly so as not to attract attention, and bring extra batteries just in case(the rechargeable kind are recommended). When harvesting more than a couple of plants remember a small pocket knife because it makes the night move quicker. Unless you are planning to use the large fan leaves for cooking, remove them in the field so they don't take up a lot of space. If you have more than one variety of erb that you are harvesting bring various bags to put the different strains of buds in, and I would suggest using backpacks for travel to avoid suspicion and for easy handling.
When to Harvest
The time to harvest depends on several factors: bud development, weather, fungus, and thieves. Some pot strains mature earlier in the fall than others, depending on the latitude of the globe where the strain originated. You will need to pull Indica varieties in late September and Columbian varieties in late October. The weather may also force you to pull early. If there is a severe freeze heading your way, you are better off not chancing that the weathermen are wrong and pull at least a majority of what you have. Another case for pulling early is if weather conditions are perfect for the fungus to run wild. This will also force you to pull early. And of course if your site has been found or is in great danger of being found, you must pull everything to avoid loosing out on what would otherwise have been a great year. For instance, if you have a site in a corn field or other temporary situation, the harvest must occur at a point in time relatively independent of weather. Also try to find out if and when hunters start to roam the fields.
One other thing to watch for is frost. Even a mild frost can damage plants so watching the weather closely in late September and throughout October is important. If your plants do get damaged by frost the erb is still harvestable so don't give up entirely if you fail to chop before the first frost. If by some freak chance there is a frost in early September and the buds are still very small you may want to allow the damage to occur and then let the buds finish maturing rather than harvesting a small quantity of premature buddage. This type of situation is an on the spot call and you must consider many factors, such as bud size, weather predictions for the following weeks, strain of weed, location of site, etc., before deciding. Indica varieties usually mature sooner than sativa varieties, and the best time to harvest varieties acclimated to the Northeast is from late September to mid October. Those varieties not acclimated to the Northeast, such as Columbian or Jamaican, are best left to late October or even mid November if the weather permits. One other thing you want to avoid is harvesting in the rain. Moisture can lead to problems in the drying process such as molds and fungi. The dryer the plants at the harvest date the better.
As mentioned before, it is important to acquire seeds from strains that can be grown at the latitude you are at, some Mexican or Colombian varieties may not develop mature buds until November and by then the weather becomes harsh. Knowing when your plants will mature is difficult for beginners or growers using new seeds for the first season.
Planning and getting to a good drying location quickly is important so the buddage is not left in bags for longer than a few hours. If the freshly harvested bud remains in bags for too long (12 hours or more), molds and fungus will begin to destroy the erb. Once you get to your drying location you need to prepare the erb for drying. This entails removing excess fan leaves and other larger leaves. However, if the drying spot has a temperature higher than 85 degrees it may be beneficial to leave a few large leaves to keep the buds from drying too quickly. Typical places to dry are attics, closets, dresser drawers, and basements. The best position for a bud to dry in is hanging upside down in a location where air can circulate all around it. If you are fortunate to have a location that you can do this in, great, otherwise use a dresser drawer or some other concealed place. If you dry the buds in dresser drawers remember not to double stack the buds or the weight of the upper layer of buds will cause a flat spot on the buds underneath. Also remember to rotate the buds every day so the erb dries uniformly and you can check for any signs of mold or fungus. If space permits and you are able to retrieve the whole plant, roots and all, you can hang them upside down by the roots, but don't expect this drying procedure to yield higher quality bud. THC does not drain from the roots down into the buds, the THC forms in the resin on the buds. The entire drying process should take place over four to six days depending on the size and variety of bud, the temperature, and the relative humidity of the drying area. If the buds are dried too quickly, the flavor of the erb will become more harsh and the THC level may not reach its potential. If the pot is dried too slowly then molds and fungi may develop and have a similar effect. With any method of drying, the process must be monitored on a day-to-day basis. Room temperature is fine for drying as long as the humidity is kept low. If drying must take place in a cool damp place then a fan and possibly a heater should be installed to compensate.
--------------------------------------------------------------------------------
If anyone grows a nice plant and wants to send a pic of it I will make a section for them to go on the site. Just for the really nice plants you grow.
Please sign my guestbook. Leave your favorite kind of weed and any other personal experiances or anyting that you want to share on the guestbook.

Removing the males
Cannabis plants are either male or female. The male plants produce pollen which pollenates the flowers of the female plant, which once pollenized, produce seeds. If the female plant isn't pollenized (if there are no male plants nearby producing pollen), the flower/buds continue to develop and produce THC. Female plants which are not pollenized are referred to as sensemilla (without seeds).
Usually 40-50% of the plants are male.

D. Removing Males: (From Outdoor Marijuana Cultivation)
Outdoor male plants will begin to produce their flowers and pollen as early as mid July for varieties acclimated to this climate. Varieties from more southern climates, may not start until mid September. This difference depends on the budding cycle of your variety, some plants start to bud earlier than others, so the exact time to cut the males will vary with the strain. If you are using a variety of different seeds it may be necessary to visit once a week from July 21 through September 15. The timely identification of a male plant is crucial to the success of the harvest. If the weather is exceptional during the time a male starts producing its flowers and you missed seeing the first signs during your last visit, you could wind up with a lot of seeds and little of the fine herb. A female can either generate a large seedless bud, a large bud with a few seeds, or a large bud that is almost totally seeds. The first case is achieved by removing all the male plants before any of their flowers open. The second case occurs when a few male flowers have opened but you remove them before any more open. The third case occurs when you miss-time the flowering of the male. This can be devastating if you have big female plants because you could loose 90% of the smokable herb to seed production. This last scenario may not always be bad though. If you are short on seeds for the next growing season, it may be prudent to let one or two males stand and fertilize a portion of the females. Good seeds are hard to come by, so if you have a strain you like, make sure to plan ahead and have at least a few hundred seeds for the future. The spotting of males is one of the most difficult of things to explain to a person that's never grown since it really takes careful attention to how the tops of male plants look at this stage of development. Even experienced growers will be unsure at times and will have to wait till the next visit to be sure. When a male enters the stage of flower development, the tips of the branches where a bud would develop will start to grow what looks like a little bud (little balls) but it will have no white hairs coming out of it.
Females will have no balls and will have small white hairs. All of the images on this page are of male plants

Males are often, but not always, tall with stout stems, sporadic branching, and few leaves. Males are usually harvested except those used for breeding, after their sex has been determined, but before the pollen is shed. When harvesting, especially if close to females, cut the plant off at the base, taking care to shake the male as little as possible. This helps prevent any accidental pollination by an unnoticed, open male flower.




http://www.fortunecity.com/

Indoor Cultivation

    Anyone Can Do It
    Even if you haven't had any prior experience with growing plants in you home, you can have a successful crop of marijuana by following the simple directions in this pamphlet. If you have had problems in the past with marijuana cultivation, you may find the solutions in the following chapters. Growing a marijuana plant involves four basic steps:
    Get the seeds. If you don't already have some, you can ask your friends to save you seeds out of any good grass they may come across. You'll find that lots of people already have a seed collection of some sort and are willing to part with a few prime seeds in exchange for some of the finished product.
    Germinate the seeds. You can simply drop a seed into moist soil, but by germinating the seeds first you can be sure that the seed will indeed produce a plant. To germinate seeds, place a group of them between about six moist paper towels, or in the pores of a moist sponge. Leave the towels or sponge moist but not soaking wet. Some seeds will germinate in 24 hours while others may take several days or even a week.
    Plant the sprouts. As soon as a seed cracks open and begins to sprout, place it on some moist soil and sprinkle a little soil over the top of it.
    Supply the plants with light. Flourescent lights are the best. Hang the lights with two inches of the soil and after the plants appear above the ground, continue to keep the lights with two inches of the plants. It is as easy as that. If you follow those four steps you will grow a marijuana plant. To ensure prime quality and the highest yield in the shortest time period, however, a few details are necessary.
    Soil
    Your prime concern, after choosing high quality seeds, is the soil. Use the best soil you can get. Scrimping on the soil doesn't pay off in the long run. If you use unsterilized soil you will almost certainly find parasites in it, probably after it is too late to transplant your marijuana. You can find excellent soil for sale at your local plant shop or nursery, K-Mart, Wal Mart, and even some grocery stores. The soil you use should have these properties for the best possible results:
    It should drain well. That is, it should have some sand in it and also some sponge rock or pearlite.
    The ph should be between 6.5 and 7.5 since marijuana does not do well in acidic soil. High acidity in soil encourages the plant to be predominantly male, an undesirable trait.
    The soil should also contain humus for retaining moisture and nutrients.
    If you want to make your own soil mixture, you can use this recipe: Mix two parts moss with one part sand and one part pearlite or sponge rock to each four gallons of soil. Test your soil for ph with litmus paper or with a soil testing kit available at most plant stores. To raise the ph of the soil, add 1/2 lb. lime to 1 cubic foot of soil to raise the ph one point. If you absolutely insist on using dirt you dug up from your driveway, you must sterilize it by baking it in your oven for about an hour at 250 degrees. Be sure to moisten it thoroughly first and also prepare yourself for a rapid evacuation of your kitchen because that hot soil is going to stink. Now add to the mixture about one tablespoon of fertilizer (like Rapid-Gro) per gallon gallon of soil and blend it in thoroughly. Better yet, just skip the whole process and spend a couple bucks on some soil.
    Containers
    After you have prepared your soil, you will have to come up with some kind of container to plant in. The container should be sterilized as well, especially if they have been used previously for growing other plants. The size of the container has a great deal to do with the rate of growth and overall size of the plant. You should plan on transplanting your plant not more than one time, since the process of transplanting can be a shock to the plant and it will have to undergo a recovery period in which growth is slowed or even stopped for a short while. The first container you use should be no larger than six inches in diameter and can be made of clay or plastic. To transplant, simply prepare the larger pot by filling it with soil and scooping out a little hole about the size of the smaller pot that the plant is in. Turn the plant upside down, pot and all, and tap the rim of the pot sharply on a counter or the edge of the sink. The soil and root ball should come out of the pot cleanly with the soil retaining the shape of the pot and with no disturbances to the root ball. Another method that can bypass the transplanting problem is using a Jiffy-Pot. Jiffy pots are made of compressed peat moss and can be planted right into moist soil where they decompose and allow the passage of the root system through their walls. The second container should have a volume of at least three gallons. Marijuana doesn't like to have its roots bound or cramped for space, so always be sure that the container you use will be deep enough for your plant's root system. It is very difficult to transplant a five-foot marijuana tree, so plan ahead. It is going to get bigger. The small plants should be ready to transplant into their permanent homes in about two weeks. Keep a close watch on them after the first week or so and avoid root binding at all costs since the plants never seem to do as well once they have been stunted by the cramping of their roots.
    Fertilizer
    Marijuana likes lots of food, but you can do damage to the plants if you are too zealous. Some fertilizers can burn a plant and damage its roots if used in to high a concentration. Most commercial soil will have enough nutrients in it to sustain the plant for about three weeks of growth so you don't need to worry about feeding your plant until the end of the third week. The most important thing to remember is to introduce the fertilizer concentration to the plant gradually. Start with a fairly diluted fertilizer solution and gradually increase the dosage. There are several good marijuana fertilizers on the commercial market, two of which are Rapid-Gro and Eco-Grow. Rapid-Gro has had widespread use in marijuana cultivation and is available in most parts of the United States. Eco-Grow is also especially good for marijuana since it contains an ingredient that keeps the soil from becoming acid. Most fertilizers cause a ph change in the soil. Adding fertilizer to the soil almost always results in a more acidic ph.
    As time goes on, the amount of salts produced by the breakdown of fertilizers in the soil causes the soil to become increasingly acidic and eventually the concentration of these salts in the soil will stunt the plant and cause browning out of the foliage. Also, as the plant gets older its roots become less effective in bringing food to the leaves. To avoid the accumulation of these salts in your soil and to ensure that your plant is getting all of the food it needs you can begin leaf feeding your plant at the age of about 1.5 months. Dissolve the fertilizer in worm water and spray the mixture directly onto the foliage. The leaves absorb the fertilizer into their veins. If you want to continue to put fertilizer into the soil as well as leaf feeding, be sure not to overdose your plants.
    Remember to increase the amount of food your plant receives gradually. Marijuana seems to be able to take as much fertilizer as you want to give it as long as it is introduced over a period of time. During the first three months or so, fertilize your plants every few days. As the rate of foliage growth slows down in the plant's preparation for blooming and seed production, the fertilizer intake of the plant should be slowed down as well. Never fertilize the plant just before you are going to harvest it since the fertilizer will encourage foliage production and slow down resin production. A word here about the most organic of fertilizers: worm castings. As you may know, worms are raised commercially for sale to gardeners. The breeders put the worms in organic compost mixtures and while the worms are reproducing they eat the organic matter and expel some of the best marijuana food around. After the worms have eaten all the organic matter in the compost, they are removed and sold and the remains are then sold as worm castings. These castings are so rich that you can grow marijuana in straight worm castings. This isn't really necessary however, and it is somewhat impractical since the castings are very expensive. If you can afford them you can, however, blend them in with your soil and they will make a very good organic fertilizer.
    Light
    Without light, the plants cannot grow. In the countries in which marijuana grows best, the sun is the source of light. The amount of light and the length of the growing season in these countries results in huge tree-like plants. In most parts of North America, however, the sun is not generally intense enough for long enough periods of time to produce the same size and quality of plants that grow with ease in Latin America and other tropical countries. The answer to the problem of lack of sun, especially in the winter months, shortness of the growing season, and other problems is to grow indoor under simulated conditions. The rule of thumb seems to be the more light, the better. In one experiment we know of, eight eight-foot VHO Gro-Lux fixtures were used over eight plants. The plants grew at an astonishing rate. The lights had to be raised every day. There are many types of artificial light and all of them do different things to your plants. The common incandescent light bulb emits some of the frequencies of light the plant can use, but it also emits a high percentage of far red and infra-red light which cause the plant to concentrate its growth on the stem. This results in the plant stretching toward the light bulb until it becomes so tall and spindly that it just weakly topples over. There are several brands of bulb type. One is the incandescent plant spot light which emits higher amounts of red and blue light than the common light bulb. It is an improvement, but has it drawbacks. it is hot, for example, and cannot be placed close to the plants. Consequently, the plant has to stretch upwards again and is in danger of becoming elongated and falling over. The red bands of light seem to encourage stem growth which is not desirable in growing marijuana. the idea is to encourage foliage growth for obvious reasons. Gro-Lux lights are probably the most common flourescent plant lights. In our experience with them, they have proven themselves to be extremely effective. They range in size from one to eight feet in length so you can set up a growing room in a closet or a warehouse. There are two types of Gro-Lux lights: The standard and the wide spectrum. They can be used in conjunction with on another, but the wide spectrum lights are not sufficient on their own. The wide spectrum lights were designed as a supplementary light source and are cheaper than the standard lights. Wide spectrum lights emit the same bands of light as the standard but the standard emit higher concentrations of red and blue bands that the plants need to grow. The wide spectrum lights also emit infra-red, the effect of which on stem growth we have already discussed. If you are planning to grow on a large scale, you might be interested to know that the regular flourescent lamps and fixtures, the type that are used in commercial lighting, work well when used along with standard Gro- Lux lights. These commercial lights are called cool whites, and are the cheapest of the flourescent lights we have mentioned. They emit as much blue light as the Gro-Lux standards and the blue light is what the plants use in foliage growth.
    Now we come to the question of intensity. Both the standard and wide spectrum lamps come in three intensities: regular output, high output, and very high output. You can grow a nice crop of plants under the regular output lamps and probably be quite satisfied with our results. The difference in using the HO or VHO lamps is the time it takes to grow a crop. Under a VHO lamp, the plants grow at a rate that is about three times the rate at which they grow under the standard lamps. People have been known to get a plant that is four feet tall in two months under one of these lights. Under the VHO lights, one may have to raise the lights every day which means a growth rate of ate least two inches a day. The only drawback is the expense of the VHO lamps and fixtures. The VHO lamps and fixtures are almost twice the price of the standard. If you are interested in our opinion, they are well worth it. Now that you have your lights up, you might be curious about the amount of light to give you plants per day. The maturation date of your plants is dependent on how much light they receive per day. The longer the dark period per day, the sooner the plant will bloom. Generally speaking, the less dark per day the better during the first six months of the plant's life. The older the plant is before it blooms and goes to seed, the better the grass will be. After the plant is allowed to bloom, its metabolic rate is slowed so that the plant's quality does not increase with the age at the same rate it did before it bloomed. The idea, then, is to let the plant get as old as possible before allowing it to mature so that the potency will be a high as possible at the time of harvest. One relatively sure way to keep your plants from blooming until you are ready for them is to leave the lights on all the time. Occasionally a plant will go ahead and bloom anyway, but it is the exception rather than the rule. If your plants receive 12 hours of light per day they will probably mature in 2 to 2.5 months. If they get 16 hours of light per day they will probably be blooming in 3.5 to 4 months. With 18 hours of light per day, they will flower in 4.5 to 5 months. Its a good idea to put your lights on a timer to ensure that the amount of light received each day remains constant. A "vacation" timer, normally used to make it look like you are home while you are away, works nicely and can be found at most hardware or discount stores.
    Energy Emissions In Arbitrary Color Bands 40 Watt Flourescent Lamps
    In Watts and Percent of Total Emissions
    Daylight Cool White Gro-Lux GroLux WS
    Light Type> Band Watts % Watts % Watts % Watts %
    Ultra-Violet -380 0.186 2.15 0.16 1.68 0.10 1.42 0.27 3.16
    Violet 380-430 0.832 9.60 0.72 7.57 0.70 9.67 1.07 12.48
    Blue 430-490 2.418 27.91 1.98 20.78 1.96 27.07 1.22 14.29
    Green 490-560 2.372 27.38 2.35 24.67 1.02 14.02 1.24 14.49
    Yellow 560-590 1.259 14.53 1.74 18.27 0.10 1.42 0.83 9.77
    Orange 590-630 1.144 13.21 1.69 17.75 0.44 6.05 1.36 15.93
    Red 630-700 0.452 6.22 0.81 8.47 2.86 39.55 1.86 21.78
    Far Red 700-780 0.130 1.53 0.07 0.81 0.06 0.80 0.69 8.10
    Total 8.890 100.0 9.52 100.0 7.24 100.0 8.54 100.0
    Temperature and Humidity
    The ideal temperature for the light hours is 68 to 78 degrees fahrenheit and for the dark hours there should be about a 15 degree drop in temperature. The growing room should be relatively dry if possible. What you want is a resinous coating on the leaves and to get the plant to do this, you must convince it that it needs the resinous coating on its leaves to protect itself from drying out. In an extremely humid room, the plants develop wide leaves and do not produce as much resin. You must take care not to let the temperature in a dry room become too hot, however, since the plant cannot assimilate water fast enough through its roots and its foliage will begin to brown out.
    Ventilation
    Proper ventilation in your growing room is fairly important. The more plants you have in one room, the more important good ventilation becomes. Plants breathe through their leaves. The also rid themselves of poisons through their leaves. If proper ventilation is not maintained, the pores of the leaves will become clogged and the leaves will die. If there is a free movement of air, the poisons can evaporate off the leaves and the plant can breathe and remain healthy.
    In a small closet where there are only a few plants you can probably create enough air circulation just by opening the door to look at them. Although it is possible to grow healthy looking plants in poorly ventilated rooms, they would be larger and healthier if they had a fresh supply of air coming in. If you spend a lot of time in your growing room, your plants will grow better because they will be using the carbon dioxide that you are exhaling around them. It is sometimes quite difficult to get a fresh supply of air in to your growing room because your room is usually hidden away in a secret corner of your house, possibly in the attic or basement. In this case, a fan will create some movement of air. It will also stimulate your plants into growing a healthier and sturdier stalk. Often times in an indoor environment, the stems of plants fail to become rigid because they don't have to cope with elements of wind and rain. To a degree, though, this is an advantage because the plant puts most of its energy into producing leaves and resin instead of stems.
    Dehumidifying Your Growing Room
    Cannabis that grows in a hot, dry climate will have narrower leaves than cannabis grown in a humid atmosphere. The reason is that in a dry atmosphere the plant can respirate easier because the moisture on the leaves evaporates faster. In a humid atmosphere, the moisture cannot evaporate as fast. Consequently, the leaves have to be broader with more surface area in order to expel the wastes that the plant put out. Since the broad leaves produce less resin per leaf than the narrow there will be more resin in an ounce of narrow leaves than in one ounce of broad leaves. There may be more leaf mass in the broader leafed plants, but most people are growing their own for quality rather than quantity.
    Since the resin in the marijuana plant serves the purpose of keeping the leaves from drying out, there is more apt to be a lot of resin produced in a dry room than in a humid one. In the Sears catalog, dehumidifiers cost around $100.00 and are therefore a bit impractical for the "hobby grower."
    Watering
    If you live near a clear mountain stream, you can skip this bit on the quality of water. Most of us are supplied water by the city and some cities add more chemicals to the water than others. They all add chlorine, however, in varying quantities. Humans over the years have learned to either get rid of it somehow or to live with it, but your marijuana plants won't have time to acquire a taste for it so you had better see that they don't have to. Chlorine will evaporate if you let the water stand for 24 hours in an open container. Letting the water stand for a day or two will serve a dual purpose: The water will come to room temperature during that period of time and you can avoid the nasty shock your plants suffer when you drench them with cold water. Always water with room temperature to lukewarm water. If your water has an excessive amount of chlorine in it, you may want to get some anti- chlorine drops at the local fish or pet store. The most important thing about watering is to do it thoroughly. You can water a plant in a three gallon container with as much as three quarts of water. The idea is to get the soil evenly moist all the way to the bottom of the pot. If you use a little water, even if you do it often, it seeps just a short way down into the soil and any roots below the moist soil will start to turn upwards toward the water. The second most important thing about watering is to see to it that the pot has good drainage. There should be some holes in the bottom so that any excess water will run out. If the pot won't drain, the excess water will accumulate in a pocket and rot the roots of the plant or simply make the soil sour or mildew. The soil, as we said earlier, must allow the water to drain evenly through it and must not become hard or packed. If you have made sure that the soil contains sand and pearlite, you shouldn't have drainage problems. To discover when to water, feel the soil with your finger. if you feel moisture in the soil, you can wait a day or two to water. The soil near the top of the pot is always drier than the soil further down. You can drown your plant just as easily as you can let it get too dry and it is more likely to survive a dry spell than it is to survive a torrential flood. Water the plants well when you water and don't water them at all when they don't need it.
    Bugs
    If you can avoid getting bugs in the first place you will be much better off. Once your plants become infested you will probably be fighting bugs for the rest of your plants' lives. To avoid bugs be sure to use sterilized soil and containers and don't bring other plants from outside into your growing room. If you have bets, ensure that they stay out of your growing room, since they can bring in pests on their fur. Examine your plants regularly for signs of insects, spots, holes in the leaves, browning of the tips of the leaves, and droopy branches. If you find that somehow in spite of all your precautions you have a plant room full of bugs, you'll have to spray your plants with some kind of insecticide. You'll want to use something that will kill the bugs and not you. Spider mites are probably the bug that will do the most damage to the marijuana plants. One of the reasons is that they are almost microscopic and very hard to spot. They are called spider mites because they leave a web-like substance clinging to the leaves. They also cause tiny little spots to appear on the leaves. Probably the first thing you'll notice, however, is that your plants look sick and depressed. The mites suck enzymes from the leaves and as a result the leaves lose some of their green color and glossiness. Sometimes the leaves look like they have some kid of fungus on them. The eggs are very tiny black dots. You might be wise to get a magnifying glass so that you can really scrutinize your plants closely. Be sure to examine the underside of the leaves too. The mites will often be found clinging to the underside as well as the top of the leaves. The sooner you start fighting the bugs, the easier it will be to get rid of them. For killing spider mites on marijuana, one of the best insecticides if "Fruit and Berry" spray made by Millers. Ortho also produces several insecticides that will kill mites. The ingredients to look for are Kelthane and Malatheon. Both of these poisons are lethal to humans and pets as well as bugs, but they both detoxify in about ten days so you can safely smoke the grass ten days after spraying. Fruit and Berry will only kill the adult mite, however, and you'll have to spray every four days for about two weeks to be sure that you have killed all the adults before they have had a chance to lay eggs. Keep a close watch on your plants because it only takes one egg laying adult to re- infest your plants and chances are that one or two will escape your barrage of insecticides. If you see little bugs flying around your plants, they are probably white flies. The adults are immune to almost all the commercial insecticides except Fruit and Berry which will not kill the eggs or larva. It is the larval stage of this insect that does the most damage. They suck out enzymes too, and kill your plants if they go unchecked. You will have to get on a spraying program just as was explained in the spider mite section.
    An organic method of bug control is using soap suds. Put Ivory flakes in some lukewarm water and work up the suds into a lather. Then put the suds over the plant. The obvious disadvantage is it you don't rinse the soap off the plant you'll taste the soap when you smoke the leaves.
    Pruning
    We have found that pruning is not always necessary. The reason one does it in the first place is to encourage secondary growth and to allow light to reach the immature leaves. Some strands of grass just naturally grow thick and bushy and if they are not clipped the sap moves in an uninterrupted flow right to the top of the plant where it produces flowers that are thick with resin. On the other hand, if your plants appear tall and spindly for their age at three weeks, they probably require a little trimming to ensure a nice full leafy plant. At three weeks of age your plant should have at least two sets of branches or four leaf clusters and a top. To prune the plant, simply slice the top off just about the place where two branches oppose each other. Use a razor blade in a straight cut. If you want to, you can root the top in some water and when the roots appear, plant the top in moist soil and it should grow into another plant. If you are going to root the top you should cut the end again, this time with a diagonal cut so as to expose more surface to the water or rooting solution. The advantage to taking cuttings from your plant is that it produces more tops. The tops have the resin, and that's the name of the game. Every time you cut off a top, the plant seeds out two more top branches at the base of the existing branches. Pruning also encourages the branches underneath to grow faster than they normally would without the top having been cut.
    Harvesting and Curing
    Well, now that you've grown your marijuana, you will want to cur it right so that it smokes clean and won't bite. You can avoid that "homegrown" taste of chlorophyll that sometimes makes one's fillings taste like they might be dissolving. We know of several methods of curing the marijuana so that it will have a mild flavor and a mellow rather than harsh smoke.
    First, pull the plant up roots and all and hang it upside down for 24 hours. Then put each plant in a paper grocery bag with the top open for three or four days or until the leaves feel dry to the touch. Now strip the leaves off the stem and put them in a glass jar with a lid. Don't pack the leaves in tightly, you want air to reach all the leaves. The main danger in the curing process is mold. If the leaves are too damp when you put them into the jar, they will mold and since the mold will destroy the resins, mold will ruin your marijuana. you should check the jars every day by smelling them and if you smell an acrid aroma, take the weed out of the jar and spread it out on newspaper so that it can dry quickly. Another method is to uproot the plants and hang them upside down. You get some burlap bags damp and slip them up over the plants. Keep the bags damp and leave them in the sun for at least a week. Now put the plants in a paper bag for a few days until the weed is dry enough to smoke. Like many fine things in life, marijuana mellows out with age. The aging process tends to remove the chlorophyll taste. Editor's Note and Important Warning:
    This pamphlet was written about 8 years ago. While the facts, figures, and methods described here are still valid, an important note must be added concerning the purchasing of equipment and supplies. The information age is upon us and and increasing amount of data is being kept about all of us whether we realize it or not. With the war on drugs in full effect, the D.E.A. is using this information at every possible opportunity.
    When you make a purchase with a credit card, every last bit of information regarding that purchase is filed away into a database, both at the store and with your credit card company. Not only the price, but the exact date, location, and items purchased are recorded and stored away. Many stores and credit card companies routinely sell their databases of customers and transactions to anybody who can afford it. The D.E.A can certainly afford it. After all, they're using your tax dollars.
    The D.E.A. as well as other government agencies DO purchase these databases for their own uses. They feed them into their computers and the computers spit out a list of anybody with "suspicious" purchases. Any purchases that could be associated with drug production, use, or selling could be flagged for further investigation. These "suspicious" purchases include unusual chemicals, medical supplies such as syringes, lights and timers, and even potting soil and fertilizer.
    The point is, if you are planning on purchasing supplies to grow marijuana don't take any chances. While the average home grower, who is simply growing enough for his own use, would probably never be flagged by the computers, you never know. If you are purchasing equipment or supplies, PAY CASH! In addition, many supermarkets and discount stores now have some sort of "Preferred Customer" cards. When you buy something, regardless of how you pay, you give them your card to scan and all of your purchases are recorded. They then send you some sort of coupon depending on what and how much you purchased each month. It sounds like a good deal, but you wind up having all of your purchases recorded and sold just like with the credit cards. DON'T use one of these cards when you are purchasing anything that might be deemed suspicious. For that matter, don't use them at all. They just result in a ton of junk mail and a lot of people knowing exactly what you buy and when you buy it.
    Anyone Can Do It
    Even if you haven't had any prior experience with growing plants in you home, you can have a successful crop of marijuana by following the simple directions in this pamphlet. If you have had problems in the past with marijuana cultivation, you may find the solutions in the following chapters. Growing a marijuana plant involves four basic steps:
    Get the seeds. If you don't already have some, you can ask your friends to save you seeds out of any good grass they may come across. You'll find that lots of people already have a seed collection of some sort and are willing to part with a few prime seeds in exchange for some of the finished product.
    Germinate the seeds. You can simply drop a seed into moist soil, but by germinating the seeds first you can be sure that the seed will indeed produce a plant. To germinate seeds, place a group of them between about six moist paper towels, or in the pores of a moist sponge. Leave the towels or sponge moist but not soaking wet. Some seeds will germinate in 24 hours while others may take several days or even a week.
    Plant the sprouts. As soon as a seed cracks open and begins to sprout, place it on some moist soil and sprinkle a little soil over the top of it.
    Supply the plants with light. Flourescent lights are the best. Hang the lights with two inches of the soil and after the plants appear above the ground, continue to keep the lights with two inches of the plants. It is as easy as that. If you follow those four steps you will grow a marijuana plant. To ensure prime quality and the highest yield in the shortest time period, however, a few details are necessary.
    Soil
    Your prime concern, after choosing high quality seeds, is the soil. Use the best soil you can get. Scrimping on the soil doesn't pay off in the long run. If you use unsterilized soil you will almost certainly find parasites in it, probably after it is too late to transplant your marijuana. You can find excellent soil for sale at your local plant shop or nursery, K-Mart, Wal Mart, and even some grocery stores. The soil you use should have these properties for the best possible results:
    It should drain well. That is, it should have some sand in it and also some sponge rock or pearlite.
    The ph should be between 6.5 and 7.5 since marijuana does not do well in acidic soil. High acidity in soil encourages the plant to be predominantly male, an undesirable trait.
    The soil should also contain humus for retaining moisture and nutrients.
    If you want to make your own soil mixture, you can use this recipe: Mix two parts moss with one part sand and one part pearlite or sponge rock to each four gallons of soil. Test your soil for ph with litmus paper or with a soil testing kit available at most plant stores. To raise the ph of the soil, add 1/2 lb. lime to 1 cubic foot of soil to raise the ph one point. If you absolutely insist on using dirt you dug up from your driveway, you must sterilize it by baking it in your oven for about an hour at 250 degrees. Be sure to moisten it thoroughly first and also prepare yourself for a rapid evacuation of your kitchen because that hot soil is going to stink. Now add to the mixture about one tablespoon of fertilizer (like Rapid-Gro) per gallon gallon of soil and blend it in thoroughly. Better yet, just skip the whole process and spend a couple bucks on some soil.
    Containers
    After you have prepared your soil, you will have to come up with some kind of container to plant in. The container should be sterilized as well, especially if they have been used previously for growing other plants. The size of the container has a great deal to do with the rate of growth and overall size of the plant. You should plan on transplanting your plant not more than one time, since the process of transplanting can be a shock to the plant and it will have to undergo a recovery period in which growth is slowed or even stopped for a short while. The first container you use should be no larger than six inches in diameter and can be made of clay or plastic. To transplant, simply prepare the larger pot by filling it with soil and scooping out a little hole about the size of the smaller pot that the plant is in. Turn the plant upside down, pot and all, and tap the rim of the pot sharply on a counter or the edge of the sink. The soil and root ball should come out of the pot cleanly with the soil retaining the shape of the pot and with no disturbances to the root ball. Another method that can bypass the transplanting problem is using a Jiffy-Pot. Jiffy pots are made of compressed peat moss and can be planted right into moist soil where they decompose and allow the passage of the root system through their walls. The second container should have a volume of at least three gallons. Marijuana doesn't like to have its roots bound or cramped for space, so always be sure that the container you use will be deep enough for your plant's root system. It is very difficult to transplant a five-foot marijuana tree, so plan ahead. It is going to get bigger. The small plants should be ready to transplant into their permanent homes in about two weeks. Keep a close watch on them after the first week or so and avoid root binding at all costs since the plants never seem to do as well once they have been stunted by the cramping of their roots.
    Fertilizer
    Marijuana likes lots of food, but you can do damage to the plants if you are too zealous. Some fertilizers can burn a plant and damage its roots if used in to high a concentration. Most commercial soil will have enough nutrients in it to sustain the plant for about three weeks of growth so you don't need to worry about feeding your plant until the end of the third week. The most important thing to remember is to introduce the fertilizer concentration to the plant gradually. Start with a fairly diluted fertilizer solution and gradually increase the dosage. There are several good marijuana fertilizers on the commercial market, two of which are Rapid-Gro and Eco-Grow. Rapid-Gro has had widespread use in marijuana cultivation and is available in most parts of the United States. Eco-Grow is also especially good for marijuana since it contains an ingredient that keeps the soil from becoming acid. Most fertilizers cause a ph change in the soil. Adding fertilizer to the soil almost always results in a more acidic ph.
    As time goes on, the amount of salts produced by the breakdown of fertilizers in the soil causes the soil to become increasingly acidic and eventually the concentration of these salts in the soil will stunt the plant and cause browning out of the foliage. Also, as the plant gets older its roots become less effective in bringing food to the leaves. To avoid the accumulation of these salts in your soil and to ensure that your plant is getting all of the food it needs you can begin leaf feeding your plant at the age of about 1.5 months. Dissolve the fertilizer in worm water and spray the mixture directly onto the foliage. The leaves absorb the fertilizer into their veins. If you want to continue to put fertilizer into the soil as well as leaf feeding, be sure not to overdose your plants.
    Remember to increase the amount of food your plant receives gradually. Marijuana seems to be able to take as much fertilizer as you want to give it as long as it is introduced over a period of time. During the first three months or so, fertilize your plants every few days. As the rate of foliage growth slows down in the plant's preparation for blooming and seed production, the fertilizer intake of the plant should be slowed down as well. Never fertilize the plant just before you are going to harvest it since the fertilizer will encourage foliage production and slow down resin production. A word here about the most organic of fertilizers: worm castings. As you may know, worms are raised commercially for sale to gardeners. The breeders put the worms in organic compost mixtures and while the worms are reproducing they eat the organic matter and expel some of the best marijuana food around. After the worms have eaten all the organic matter in the compost, they are removed and sold and the remains are then sold as worm castings. These castings are so rich that you can grow marijuana in straight worm castings. This isn't really necessary however, and it is somewhat impractical since the castings are very expensive. If you can afford them you can, however, blend them in with your soil and they will make a very good organic fertilizer.
    Light
    Without light, the plants cannot grow. In the countries in which marijuana grows best, the sun is the source of light. The amount of light and the length of the growing season in these countries results in huge tree-like plants. In most parts of North America, however, the sun is not generally intense enough for long enough periods of time to produce the same size and quality of plants that grow with ease in Latin America and other tropical countries. The answer to the problem of lack of sun, especially in the winter months, shortness of the growing season, and other problems is to grow indoor under simulated conditions. The rule of thumb seems to be the more light, the better. In one experiment we know of, eight eight-foot VHO Gro-Lux fixtures were used over eight plants. The plants grew at an astonishing rate. The lights had to be raised every day. There are many types of artificial light and all of them do different things to your plants. The common incandescent light bulb emits some of the frequencies of light the plant can use, but it also emits a high percentage of far red and infra-red light which cause the plant to concentrate its growth on the stem. This results in the plant stretching toward the light bulb until it becomes so tall and spindly that it just weakly topples over. There are several brands of bulb type. One is the incandescent plant spot light which emits higher amounts of red and blue light than the common light bulb. It is an improvement, but has it drawbacks. it is hot, for example, and cannot be placed close to the plants. Consequently, the plant has to stretch upwards again and is in danger of becoming elongated and falling over. The red bands of light seem to encourage stem growth which is not desirable in growing marijuana. the idea is to encourage foliage growth for obvious reasons. Gro-Lux lights are probably the most common flourescent plant lights. In our experience with them, they have proven themselves to be extremely effective. They range in size from one to eight feet in length so you can set up a growing room in a closet or a warehouse. There are two types of Gro-Lux lights: The standard and the wide spectrum. They can be used in conjunction with on another, but the wide spectrum lights are not sufficient on their own. The wide spectrum lights were designed as a supplementary light source and are cheaper than the standard lights. Wide spectrum lights emit the same bands of light as the standard but the standard emit higher concentrations of red and blue bands that the plants need to grow. The wide spectrum lights also emit infra-red, the effect of which on stem growth we have already discussed. If you are planning to grow on a large scale, you might be interested to know that the regular flourescent lamps and fixtures, the type that are used in commercial lighting, work well when used along with standard Gro- Lux lights. These commercial lights are called cool whites, and are the cheapest of the flourescent lights we have mentioned. They emit as much blue light as the Gro-Lux standards and the blue light is what the plants use in foliage growth.
    Now we come to the question of intensity. Both the standard and wide spectrum lamps come in three intensities: regular output, high output, and very high output. You can grow a nice crop of plants under the regular output lamps and probably be quite satisfied with our results. The difference in using the HO or VHO lamps is the time it takes to grow a crop. Under a VHO lamp, the plants grow at a rate that is about three times the rate at which they grow under the standard lamps. People have been known to get a plant that is four feet tall in two months under one of these lights. Under the VHO lights, one may have to raise the lights every day which means a growth rate of ate least two inches a day. The only drawback is the expense of the VHO lamps and fixtures. The VHO lamps and fixtures are almost twice the price of the standard. If you are interested in our opinion, they are well worth it. Now that you have your lights up, you might be curious about the amount of light to give you plants per day. The maturation date of your plants is dependent on how much light they receive per day. The longer the dark period per day, the sooner the plant will bloom. Generally speaking, the less dark per day the better during the first six months of the plant's life. The older the plant is before it blooms and goes to seed, the better the grass will be. After the plant is allowed to bloom, its metabolic rate is slowed so that the plant's quality does not increase with the age at the same rate it did before it bloomed. The idea, then, is to let the plant get as old as possible before allowing it to mature so that the potency will be a high as possible at the time of harvest. One relatively sure way to keep your plants from blooming until you are ready for them is to leave the lights on all the time. Occasionally a plant will go ahead and bloom anyway, but it is the exception rather than the rule. If your plants receive 12 hours of light per day they will probably mature in 2 to 2.5 months. If they get 16 hours of light per day they will probably be blooming in 3.5 to 4 months. With 18 hours of light per day, they will flower in 4.5 to 5 months. Its a good idea to put your lights on a timer to ensure that the amount of light received each day remains constant. A "vacation" timer, normally used to make it look like you are home while you are away, works nicely and can be found at most hardware or discount stores.
    Energy Emissions In Arbitrary Color Bands 40 Watt Flourescent Lamps
    In Watts and Percent of Total Emissions
    Daylight Cool White Gro-Lux GroLux WS
    Light Type> Band Watts % Watts % Watts % Watts %
    Ultra-Violet -380 0.186 2.15 0.16 1.68 0.10 1.42 0.27 3.16
    Violet 380-430 0.832 9.60 0.72 7.57 0.70 9.67 1.07 12.48
    Blue 430-490 2.418 27.91 1.98 20.78 1.96 27.07 1.22 14.29
    Green 490-560 2.372 27.38 2.35 24.67 1.02 14.02 1.24 14.49
    Yellow 560-590 1.259 14.53 1.74 18.27 0.10 1.42 0.83 9.77
    Orange 590-630 1.144 13.21 1.69 17.75 0.44 6.05 1.36 15.93
    Red 630-700 0.452 6.22 0.81 8.47 2.86 39.55 1.86 21.78
    Far Red 700-780 0.130 1.53 0.07 0.81 0.06 0.80 0.69 8.10
    Total 8.890 100.0 9.52 100.0 7.24 100.0 8.54 100.0
    Temperature and Humidity
    The ideal temperature for the light hours is 68 to 78 degrees fahrenheit and for the dark hours there should be about a 15 degree drop in temperature. The growing room should be relatively dry if possible. What you want is a resinous coating on the leaves and to get the plant to do this, you must convince it that it needs the resinous coating on its leaves to protect itself from drying out. In an extremely humid room, the plants develop wide leaves and do not produce as much resin. You must take care not to let the temperature in a dry room become too hot, however, since the plant cannot assimilate water fast enough through its roots and its foliage will begin to brown out.
    Ventilation
    Proper ventilation in your growing room is fairly important. The more plants you have in one room, the more important good ventilation becomes. Plants breathe through their leaves. The also rid themselves of poisons through their leaves. If proper ventilation is not maintained, the pores of the leaves will become clogged and the leaves will die. If there is a free movement of air, the poisons can evaporate off the leaves and the plant can breathe and remain healthy.
    In a small closet where there are only a few plants you can probably create enough air circulation just by opening the door to look at them. Although it is possible to grow healthy looking plants in poorly ventilated rooms, they would be larger and healthier if they had a fresh supply of air coming in. If you spend a lot of time in your growing room, your plants will grow better because they will be using the carbon dioxide that you are exhaling around them. It is sometimes quite difficult to get a fresh supply of air in to your growing room because your room is usually hidden away in a secret corner of your house, possibly in the attic or basement. In this case, a fan will create some movement of air. It will also stimulate your plants into growing a healthier and sturdier stalk. Often times in an indoor environment, the stems of plants fail to become rigid because they don't have to cope with elements of wind and rain. To a degree, though, this is an advantage because the plant puts most of its energy into producing leaves and resin instead of stems.
    Dehumidifying Your Growing Room
    Cannabis that grows in a hot, dry climate will have narrower leaves than cannabis grown in a humid atmosphere. The reason is that in a dry atmosphere the plant can respirate easier because the moisture on the leaves evaporates faster. In a humid atmosphere, the moisture cannot evaporate as fast. Consequently, the leaves have to be broader with more surface area in order to expel the wastes that the plant put out. Since the broad leaves produce less resin per leaf than the narrow there will be more resin in an ounce of narrow leaves than in one ounce of broad leaves. There may be more leaf mass in the broader leafed plants, but most people are growing their own for quality rather than quantity.
    Since the resin in the marijuana plant serves the purpose of keeping the leaves from drying out, there is more apt to be a lot of resin produced in a dry room than in a humid one. In the Sears catalog, dehumidifiers cost around $100.00 and are therefore a bit impractical for the "hobby grower."
    Watering
    If you live near a clear mountain stream, you can skip this bit on the quality of water. Most of us are supplied water by the city and some cities add more chemicals to the water than others. They all add chlorine, however, in varying quantities. Humans over the years have learned to either get rid of it somehow or to live with it, but your marijuana plants won't have time to acquire a taste for it so you had better see that they don't have to. Chlorine will evaporate if you let the water stand for 24 hours in an open container. Letting the water stand for a day or two will serve a dual purpose: The water will come to room temperature during that period of time and you can avoid the nasty shock your plants suffer when you drench them with cold water. Always water with room temperature to lukewarm water. If your water has an excessive amount of chlorine in it, you may want to get some anti- chlorine drops at the local fish or pet store. The most important thing about watering is to do it thoroughly. You can water a plant in a three gallon container with as much as three quarts of water. The idea is to get the soil evenly moist all the way to the bottom of the pot. If you use a little water, even if you do it often, it seeps just a short way down into the soil and any roots below the moist soil will start to turn upwards toward the water. The second most important thing about watering is to see to it that the pot has good drainage. There should be some holes in the bottom so that any excess water will run out. If the pot won't drain, the excess water will accumulate in a pocket and rot the roots of the plant or simply make the soil sour or mildew. The soil, as we said earlier, must allow the water to drain evenly through it and must not become hard or packed. If you have made sure that the soil contains sand and pearlite, you shouldn't have drainage problems. To discover when to water, feel the soil with your finger. if you feel moisture in the soil, you can wait a day or two to water. The soil near the top of the pot is always drier than the soil further down. You can drown your plant just as easily as you can let it get too dry and it is more likely to survive a dry spell than it is to survive a torrential flood. Water the plants well when you water and don't water them at all when they don't need it.
    Bugs
    If you can avoid getting bugs in the first place you will be much better off. Once your plants become infested you will probably be fighting bugs for the rest of your plants' lives. To avoid bugs be sure to use sterilized soil and containers and don't bring other plants from outside into your growing room. If you have bets, ensure that they stay out of your growing room, since they can bring in pests on their fur. Examine your plants regularly for signs of insects, spots, holes in the leaves, browning of the tips of the leaves, and droopy branches. If you find that somehow in spite of all your precautions you have a plant room full of bugs, you'll have to spray your plants with some kind of insecticide. You'll want to use something that will kill the bugs and not you. Spider mites are probably the bug that will do the most damage to the marijuana plants. One of the reasons is that they are almost microscopic and very hard to spot. They are called spider mites because they leave a web-like substance clinging to the leaves. They also cause tiny little spots to appear on the leaves. Probably the first thing you'll notice, however, is that your plants look sick and depressed. The mites suck enzymes from the leaves and as a result the leaves lose some of their green color and glossiness. Sometimes the leaves look like they have some kid of fungus on them. The eggs are very tiny black dots. You might be wise to get a magnifying glass so that you can really scrutinize your plants closely. Be sure to examine the underside of the leaves too. The mites will often be found clinging to the underside as well as the top of the leaves. The sooner you start fighting the bugs, the easier it will be to get rid of them. For killing spider mites on marijuana, one of the best insecticides if "Fruit and Berry" spray made by Millers. Ortho also produces several insecticides that will kill mites. The ingredients to look for are Kelthane and Malatheon. Both of these poisons are lethal to humans and pets as well as bugs, but they both detoxify in about ten days so you can safely smoke the grass ten days after spraying. Fruit and Berry will only kill the adult mite, however, and you'll have to spray every four days for about two weeks to be sure that you have killed all the adults before they have had a chance to lay eggs. Keep a close watch on your plants because it only takes one egg laying adult to re- infest your plants and chances are that one or two will escape your barrage of insecticides. If you see little bugs flying around your plants, they are probably white flies. The adults are immune to almost all the commercial insecticides except Fruit and Berry which will not kill the eggs or larva. It is the larval stage of this insect that does the most damage. They suck out enzymes too, and kill your plants if they go unchecked. You will have to get on a spraying program just as was explained in the spider mite section.
    An organic method of bug control is using soap suds. Put Ivory flakes in some lukewarm water and work up the suds into a lather. Then put the suds over the plant. The obvious disadvantage is it you don't rinse the soap off the plant you'll taste the soap when you smoke the leaves.
    Pruning
    We have found that pruning is not always necessary. The reason one does it in the first place is to encourage secondary growth and to allow light to reach the immature leaves. Some strands of grass just naturally grow thick and bushy and if they are not clipped the sap moves in an uninterrupted flow right to the top of the plant where it produces flowers that are thick with resin. On the other hand, if your plants appear tall and spindly for their age at three weeks, they probably require a little trimming to ensure a nice full leafy plant. At three weeks of age your plant should have at least two sets of branches or four leaf clusters and a top. To prune the plant, simply slice the top off just about the place where two branches oppose each other. Use a razor blade in a straight cut. If you want to, you can root the top in some water and when the roots appear, plant the top in moist soil and it should grow into another plant. If you are going to root the top you should cut the end again, this time with a diagonal cut so as to expose more surface to the water or rooting solution. The advantage to taking cuttings from your plant is that it produces more tops. The tops have the resin, and that's the name of the game. Every time you cut off a top, the plant seeds out two more top branches at the base of the existing branches. Pruning also encourages the branches underneath to grow faster than they normally would without the top having been cut.
    Harvesting and Curing
    Well, now that you've grown your marijuana, you will want to cur it right so that it smokes clean and won't bite. You can avoid that "homegrown" taste of chlorophyll that sometimes makes one's fillings taste like they might be dissolving. We know of several methods of curing the marijuana so that it will have a mild flavor and a mellow rather than harsh smoke.
    First, pull the plant up roots and all and hang it upside down for 24 hours. Then put each plant in a paper grocery bag with the top open for three or four days or until the leaves feel dry to the touch. Now strip the leaves off the stem and put them in a glass jar with a lid. Don't pack the leaves in tightly, you want air to reach all the leaves. The main danger in the curing process is mold. If the leaves are too damp when you put them into the jar, they will mold and since the mold will destroy the resins, mold will ruin your marijuana. you should check the jars every day by smelling them and if you smell an acrid aroma, take the weed out of the jar and spread it out on newspaper so that it can dry quickly. Another method is to uproot the plants and hang them upside down. You get some burlap bags damp and slip them up over the plants. Keep the bags damp and leave them in the sun for at least a week. Now put the plants in a paper bag for a few days until the weed is dry enough to smoke. Like many fine things in life, marijuana mellows out with age. The aging process tends to remove the chlorophyll taste. Editor's Note and Important Warning:
    This pamphlet was written about 8 years ago. While the facts, figures, and methods described here are still valid, an important note must be added concerning the purchasing of equipment and supplies. The information age is upon us and and increasing amount of data is being kept about all of us whether we realize it or not. With the war on drugs in full effect, the D.E.A. is using this information at every possible opportunity.
    When you make a purchase with a credit card, every last bit of information regarding that purchase is filed away into a database, both at the store and with your credit card company. Not only the price, but the exact date, location, and items purchased are recorded and stored away. Many stores and credit card companies routinely sell their databases of customers and transactions to anybody who can afford it. The D.E.A can certainly afford it. After all, they're using your tax dollars.
    The D.E.A. as well as other government agencies DO purchase these databases for their own uses. They feed them into their computers and the computers spit out a list of anybody with "suspicious" purchases. Any purchases that could be associated with drug production, use, or selling could be flagged for further investigation. These "suspicious" purchases include unusual chemicals, medical supplies such as syringes, lights and timers, and even potting soil and fertilizer.
    The point is, if you are planning on purchasing supplies to grow marijuana don't take any chances. While the average home grower, who is simply growing enough for his own use, would probably never be flagged by the computers, you never know. If you are purchasing equipment or supplies, PAY CASH! In addition, many supermarkets and discount stores now have some sort of "Preferred Customer" cards. When you buy something, regardless of how you pay, you give them your card to scan and all of your purchases are recorded. They then send you some sort of coupon depending on what and how much you purchased each month. It sounds like a good deal, but you wind up having all of your purchases recorded and sold just like with the credit cards. DON'T use one of these cards when you are purchasing anything that might be deemed suspicious. For that matter, don't use them at all. They just result in a ton of junk mail and a lot of people knowing exactly what you buy and when you buy it.
    --------------------------------------------------------------------------------
    --------------------------------------------------------------------------------

    Favorite Links
    .

    C-net
    Downloads of all kinds

    .

    Security type program search engine
    Best I've seen

    .




    This page has been visited times.